Home > Shop > Frame Sliders > MV Agusta > Brutale 990R / 1078RR / 1090RR / 920 / 800 / 750S >

2008 - 2020 MV Agusta Brutale No Cut Frame Sliders
T-Rex Racing 2008 - 2020 MV Agusta Brutale No Cut Frame Sliders


 
Alternative Views:
Part Number: N181
Our Price: $139.95

Quantity in Stock:20


Availability:: Usually Ships in 1 to 2 Business Days
Qty:

Description
 
  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in a low side
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
  • NO CUT or plastic fairing modifications required
  • Fit Models: MV Agusta
  • 2008 - 2020 Brutale 990R / 1090RR
  • 2014 - 2015 Brutale 1078RR
  • 2011 - 2012 Brutale 920
  • PDF Instruction:
This purchase is for a set of frame sliders for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets will wrap around the frame to prevent them from rotating in the event of a low side. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Saved my tank and frame, etc. September 17, 2019
Reviewer: Ryan V. from CA  
Had the trifecta of bad stuff this morning, someone walking their 2 dogs, construction crud and steel plates on the road right outside our driveway and cars approaching from the right caused me to stop.  Normally this isn't a problem, but I was slightly off camber and put my foot down on loose gravel and twigs and my foot shot out and down the bike went.
The frame slider did its job!  The MV has expensive! parts to protect.  Glad the tank was unscathed.  Thanks for the tough product and the ability to replace just the slider material.
Personally I also like the look of the wing style of these frame guards.  They match the lines of the bike.
Ryan

Was this review helpful to you?