 |
- Condition: New
- Special feature: Multiple mounting points, replaceable engine guard pucks, compatible with both edition skid plates (N105SP & N105SPB4) and center stand (N105CS)
- Material: UHMW-PE (ultra high molecular weight polyethylene), steel, aircraft grade aluminum
- NO CUT or plastic fairings modification required
- Fit Models: Suzuki
- 1996 - 2020 DR650 / DR650S / DR650SE
- Fitting Difficulty (1-5): 3 - Average (1 - easy / 5 - Little bit of skill)
- Fitting Time: 30 - 45 minutes
- PDF Instruction:
- Notice: Unless otherwise specified, our products are not designed to fit other after market products. Items are designed to fit stock / oem and other T-Rex Racing products for the specific bike.
This purchase is for a set of engine guards for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The steel tubing is bolted to the sub frame of the bike and the slider puck is bolted onto it. The steel tubing has three attachment points preventing them from rotating in the event of a low side. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for engine guards since it can absorb more impact force onto itself and therefore reduce the impact on the bike. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.
|
|
|
Doesnt fit with a skid plate 
