Home > Shop > Frame Sliders > Harley-Davidson > Roadster / XR1200 >

2008 - 2014 Harley-Davidson XR1200 Sportster No Cut Frame Sliders Spool Adapters
T-Rex Racing 2008 - 2014 Harley-Davidson XR1200 Sportster No Cut Frame Sliders Spool Adapters


 
Alternative Views:
Part Number: N210 + N210SA
Our Price: $199.95

Quantity in Stock:20


Availability:: Usually Ships in 1 to 2 Business Days
Qty:

Description
 
  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in a low side and braced together to increase strength
  • Material: UHMW-PE (ultra high molecular weight polyethylene), stainless steel bar, and aircraft grade aluminum brackets
  • NO CUT or plastic fairing modifications required
  • Fit Models: Harley-Davidson
  • 2008 - 2014 XR1200 Sportster
This purchase is for a set of no cut frame sliders and swing arm spool adapters for the models above. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets are designed to wrap around the frame preventing them from rotating in the event of a low side. The brackets are braced together by a crossbar in order to increase its strength. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. The swingarm spool adapters attach to the swingarm since the XR 1200 does not come with stock spools. The adapters can be used to lift the bike safely with a rear stand and not risk it slipping off. You will be able to remove your rear wheel or lube your chain as well, no other manufacturer allows this. Also the adapters serve as swingarm sliders, which can take some of the impact away from the swingarm in the event of a fall or tip over. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »