Home > Shop > Frame Sliders > BMW > S1000R / S1000RR / S1000XR / HP4 >

2012 - 2014 BMW S1000RR No Cut Frame Clutch Front & Rear Axle Sliders Spools

2012 - 2014 BMW S1000RR No Cut Frame Clutch Front & Rear Axle Sliders Spools


 
Alternative Views:


Part Number: N134-12 + N134-10F + N134-10R + N134-10CLU + BlaPlaSpool8
Our Price: $234.95


Availability:: Usually Ships in 24 to 48 Hours


Puck Text Color:


Qty:  
Description
 
  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in a low side.
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum brackets
  • NO CUT or plastic fairing modifications required
  • Fit Models: BMW
  • 2012 - 2014 S1000RR
This purchase is for a set of frame sliders for the above bike model, it includes front axle sliders, frame sliders, rear axle sliders, clutch sliders and a free set of rear swingarm spools (while supplies last). The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The right side bracket is designed to wrap around the frame preventing them from rotating in the event of a low side. For the left side the puck is mounted directly onto the frame. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability.It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. For the front and rear axle sliders the installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. The bolts are made of highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »