Home > Shop > Swingarm Spools / Spool Adapters > Kawasaki > Ninja 1000 >

Kawasaki Ninja 1000 / Z1000 / Z900 / Z900RS / ZX-6R Spool Adapters

T-Rex Racing Kawasaki Ninja 1000 / Z1000 / Z900 / Z900RS / ZX-6R Spool Adapters


 
Alternative Views:


Part Number: N55-14SA
Our Price: $54.95

Quantity in Stock:20


Availability:: Usually Ships in 24 to 48 Hours
Qty:

Description
 
  • Condition: New
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
  • No cut or fairing modifications required
  • Fit Models: Kawasaki
  • 2014 - 2024 Ninja 1000 / Z1000/ Ninja 1000 SX
  • 2017 - 2024 Z900 / Z900RS / ABS / Cafe
  • 2019 - 2024 ZX-6R
  • PDF Instruction:
This purchase is for a set of spool adapters for the above models. Lifting the rear of a bike is uniquely challenging. The swing-arms have no threaded holes for spools and are at an angle. Without spools, the bike can be difficult to lift with a stand. Once lifted, it can be unstable. The angle on the swing-arms makes it worse. It can cause the bike to slip off the stand and fall. T-Rex spool adapters are made to meet this challenge. They are designed to securely attach to the swing-arms and allow safe lifting of the rear wheel using a paddock stand. Other manufacturers' spool adapters will also allow you to lift the bike but will not allow you to remove the wheel. This is because their spools are attached to the chain adjuster blocks and they will come off as the wheel removed. Our spool adapters attach to the swing-arm tubing. For this model, normal spools will damage the stock exhaust because the spool mounts located too much forward and too close to the exhausts. These spool adapters are designed to prevent damage to the exhausts and the swingarms. It moves the spools rearward about two inches.

Share your knowledge of this product. Be the first to write a review »