Home > Shop > Frame Sliders > BMW > S1000R / S1000RR / S1000XR / HP4 >

2014 - 2017 BMW S1000R No Cut Frame Sliders Quick Release Axle Sliders Engine Case Pump Covers Spools

T-Rex Racing 2014 - 2017 BMW S1000R No Cut Frame Sliders Quick Release Axle Sliders Engine Case Pump Covers Spools


 
Part Number: N136-14 + N136-14PC + N134-10C + N134-10FQ + N134-10RQ + BlaPlaSpool8
Our Price: $409.95


Availability:: Usually Ships in 24 to 48 Hours


R Color:


Qty:  
Description
 
  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in a lowside, aluminum inserts to prolong puck life
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum brackets and inserts, High Strength Neodymium Magnets
  • NO CUT or plastic fairings modification required
  • Fit Models: BMW
  • 2014 - 2017 S1000R
  • This item is for the S1000R and not the S1000RR
This purchase is for a complete protection kit that includes a pair frame sliders, axle slider, engine case covers, and a pump cover for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The right side bracket is designed to wrap around the frame preventing it from rotating in the event of a low side. For the left side the frame slider is mounted directly into the frame. The quick release axle sliders provide indispensable protection for your expensive swing-arm and front fork. It also allows one to quickly remove the sliders without removing any bolts or screws like those in a typical axle slider. This also facilitates quick removal of either wheel. It is an essential convenience at the track where you can promptly raise your bike as soon as you pull in a paddock. The two sides of the axle sliders are attached by high strength Neodymium magnets.The material of the pucks and covers are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »