Home > Shop > Frame Sliders > Honda > CBR600RR / CBR929RR / CBR954RR / CBR1000RR / CBR1100XX >

2017 - 2019 Honda CBR1000RR No Cut Frame Sliders

T-Rex Racing 2017 - 2019 Honda CBR1000RR No Cut Frame Sliders


 
Alternative Views:


Part Number: N37-17
Our Price: $149.95


Availability:: Usually Ships in 24 to 48 Hours


Aluminum Insert Color:


Qty:  
Description
 
  • Condition: New
  • Special feature: Aircraft grade aluminum inserts to prolong puck life
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum brackets with laser engravings
  • NO CUT or plastic fairings modification required
  • Fit Models: Honda
  • 2017 - 2019 CBR1000RR ABS / Non ABS
This purchase is for a set of frame sliders for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets are designed to wrap around the frame preventing them from rotating in the event of a low side. The brackets are braced together by a crossbar in order to increase its strength. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Fast,Adds drip and easy March 4, 2019
Reviewer: Justin Burnett from Alabama  
Fast install if you are good with un/installing the fairings  ,Adds drip to the bike style and easy to understand instructions and hopefully I never get to see the performance of them but good purchase

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Good construction, poor placement January 24, 2019
Reviewer: Gene from Oklahoma  
The set is well constructed, with good materials, but the place where they are installed is a bit poor. Unfortunately, during a 25mph lowside, the frameslider snapped off and punctured a hole in my '17 Fireblade. The bike was totalled.

Was this review helpful to you?