Home > Shop > Single Sided Swingarm Stands > Ducati >

Gold Galvanized Ducati Single Sided Rear Stand 748 / 848 / 916 / 996 / 998 / Monster 796 / S4R / 1100 / Multistrada 1000 / Hypermotard 1100

Gold Galvanized Ducati Single Sided Rear Stand 748 / 848 / 916 / 996 / 998 / Monster 796 / S4R / 1100 / Multistrada 1000 / Hypermotard 1100


 
Our Price: $164.95

Quantity in Stock:7

Availability:: Usually Ships in 24 to 48 Hours
Qty:

Description
 
  • Condition: New
  • Special feature: Reversible stand, extra pin slot
  • Size: 1 5/8" in diameter tube
  • Thickness: 1/8"
  • Material: Carbon steel tubing (grade 2)
  • Finishes:Gold Galvanized
This purchase is for a single sided swing arm stand that comes with two pins. The stand fits the Ducati 748, 848, 916, 996, 998, Monster 796, S4R, 1100, Multistrada 1000, and Hypermotard 1100. The upright twin tubing provides unbeatable strength. The threaded rod is inserted through the axle hole to the other side of the wheel. The over-sized washer and the butterfly nut are attached onto the rod to prevent bike from sliding off the stand as the wheel spins. Long handle bar gives extra leverage and can be reversed to forward direction. Ball bearing pins allow the rear wheel spin easily while being lifted. The center wheel-stop rod prevents the rear wheel from spinning during removal. The stand was cleansed in chemical bath, stabilized zinc phosphate coating and gold galvanized finished to prevent it from the elemental degradation. The stand requires a simple bolt on assembly.

Share your knowledge of this product. Be the first to write a review »