Home > Ducati > 1098 > 2007 - 2008 >

All Years Ducati 1098 / 1198 R / S / SP No Cut Frame Front & Rear Axle Sliders
All Years Ducati 1098 / 1198 R / S / SP No Cut Frame Front & Rear Axle Sliders


 
Alternative Views:
Part Number: N80-7 + N80-7F + N80-7R
Our Price: $249.95



Availability:: Usually Ships in 24 to 48 Hours


Kit Color*:

Qty:  
Description
 
  • Condition: New
  • Material: UHMW-PE (ultra high molecular weight polyethylene), steel, aircraft grade aluminum
  • Special Feature: Aircraft grade aluminum pucks for the rear axle sliders. Also doubles as spools for bike stand. Compatible with our strapless tie down
  • Slider dimensions: Approx. 2.5" and 3.5" in length and 2" in diameter for the frame sliders,1.5" in overall length, 1.75" in diameter for the front axle sliders, 4" in overall length, 2" in diameter for the rear axle sliders.
  • No cut or plastic fairing modifications required
  • Fit Models: Ducati
  • All Years 1098 / 1198 R / S / SP
This purchase is for a pair of frame sliders, front axle sliders, and rear axle sliders. The frame slider features a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The spacer is bolted to the engine mount and the slider puck is screwed onto it. Since this spacer is made of solid billet aluminum there is no need for re-tightening the engine bolt in the long run where you have to do so with a plastic slider as the plastic would gradually give in and therefore making the bolt loose. The front part of the frame slider kit features the under fairing frame slider which like it is stated sits behind the faring. It protects the fairing bracket and other critical engine components.

The material of the frame slider and front axle pucks are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The rear axle slider pucks are made from anodized aircraft grade aluminum. They also double as spools to allow the use of a rear motorcycle stand. These upgraded axle sliders are now even stronger and makes them compatible with our strapless tie downs. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »