Home > Shop > Frame Sliders > Suzuki > GSX-R600 / GSX-R750 / GSX-R1000 >

2011 - 2018 Suzuki GSX-R600 / GSX-R750 No Cut Frame Sliders

2011 - 2018 Suzuki GSX-R600 / GSX-R750 No Cut Frame Sliders


 
Alternative Views:


Part Number: N59-11
Our Price: $129.95


Availability:: Usually Ships in 24 to 48 Hours


Aluminum Insert Color:


Qty:  
Description
 
  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in a low side and braced together to increase strength
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum brackets
  • No cut or plastic fairing modification required
  • Fit Models: Suzuki
  • 2011 - 2018 GSX-R600 / GSX-R750
This purchase is for a set of frame sliders for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets are designed to wrap around the frame preventing them from rotating in the event of a low side. They are braced together by a crossbar in order to increase its strength. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. The bolts are made of highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »