Home > Shop > Frame Sliders >

2006 - 2010 Suzuki GSX-R600 / GSX-R750 No Cut Frame Front Axle Sliders Spools
T-Rex Racing 2006 - 2010 Suzuki GSX-R600 / GSX-R750 No Cut Frame Front Axle Sliders Spools


 
Alternative Views:
Part Number: N59-6 + N59-9F + BlaPlaSpool8
Our Price: $109.95

Quantity in Stock:20


Availability:: Usually Ships in 24 to 48 Hours
Qty:

Description
 
  • Condition: New
  • Special feature: Aluminum inserts to prolong the life of the pucks
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
  • NO CUT or plastic fairings modification required
  • Fit Models: Suzuki
  • 2006 - 2010 GSX-R600 / GSX-R750
This purchase is for a pair of frame sliders and front axle sliders for the above model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the aluminum spacer is bolted to the bracket. The slider puck is then screwed on to the spacer. The left bracket has two attachment points preventing it from rotating in the event of a low side. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »