Size: 1 5/8" in diameter tube
Material: Carbon steel tube (grade 2)
Finishes: Gold Galvanized
This purchase is for one single sided swing arm stand. The stand fits the Honda CB1000R VFR Hawk NT650 and comes with one pin. The upright twin tubing provides unbeatable strength. The threaded rod is inserted through the axle hole to the other side of the wheel. The over-sized washer and the butterfly nut are attached onto the rod to prevent bike from sliding off the stand as the wheel spins. Long handle bar gives extra leverage and can be reversed to forward direction. Ball bearing pins allow the rear wheel spin easily while being lifted. The center wheel-stop rod prevents the rear wheel from spinning during removal. The stand was cleansed in chemical bath, stabilized zinc phosphate coating and finally finished with black electrostatic powder coat to prevent it from the elemental degradation. The stand requires a simple bolt on assembly.
Patent: The design of the T-Rex Honda VFR Hawk NT650 Single One Arm Stand stand has been filed with US Patent Office. Federal law also provides civil and criminal penalties for the unauthorized reproduction, distribution or sale of patented design (Code 35 U.S.C. 261). The FBI investigates allegations of criminal patent infringement.
Copyright © 2008 T-Rex Racing, Inc.
All rights reserved