Home > Shop > Frame Sliders > Kawasaki > Ninja 650 / 650R / 1000 / H2 / H2R / Z H2 >

2006 - 2008 Kawasaki Ninja 650R No Cut Frame Sliders

T-Rex Racing 2006 - 2008 Kawasaki Ninja 650R Frame Sliders


 
Part Number: N54-6
Our Price: $99.95

Quantity in Stock:20


Availability:: Usually Ships in 1 to 2 Business Days
Qty:

Description
 
  • Condition: New
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
  • No cut or plastic modification required
  • Fit Models: Kawasaki
  • 2006 - 2008 Ninja 650R
  • PDF Instruction:
This purchase is for a set of frame sliders for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect install, solid hardware July 10, 2023
Reviewer: RP from California  
Parts are beefy especially the sliders that screw on the mount and are replaceable if you slide a lot.
Install was easy. Nearly impossible to do it wrong as long as you don't lose or mix up the bike's original parts. I took the left/right fairings off to make things easier but you can probably keep them on if you want to do this fast. The frame sliders don't touch the fairings at all once all is installed. Super precise all around.
The single 10mm bolt on the right side of bike feel very solid. Same story with the two shorter 8mm bolts on the left side. The u-channel that semi-lock into the frame make them feel double secure. I like grabbing the bike by the sliders now. These are way better than whatever the previous owner put on the Ninja 650R.
Will come back again for sliders for my future bikes.

Was this review helpful to you?