Home > Shop > Frame Sliders > Honda > CB1000R / CB1100 >

2011 - 2017 Honda CB1000R No Cut Frame Front & Rear Axle Sliders - Round Pucks

2011 - 2017 Honda CB1000R No Cut Frame Front & Rear Axle Sliders - Round Pucks

Alternative Views:

Part Number: N33-11 + N32-13F + N33-11R
Our Price: $152.95

Quantity in Stock:(Out of Stock)

Availability:: Usually Ships in 24 to 48 Hours

  • Condition: New
  • Material: UHMW-PE (ultra high molecular weight polyethylene)
  • NO CUT or plastic fairings modification required
  • Fit Models: Honda
  • 2011 - 2017 CB1000R
This purchase is for a complete protection kit for the above bike model, it includes front axle, frame and rear axle sliders. The Frame sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The spacer is bolted to the engine mount and the slider puck is screwed onto it. Since this spacer is made of solid billet aluminum there is no need for re-tightening the engine bolt in the long run where you have to do so with plastic slider as the plastic would gradually give in and therefore making the bolt loose. The puck material are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. The bolt is made of grade 6 stainless steel. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »